Hi! My name is Vladimir. I'm a mechanical designer
- Focus on water treatment, oil and gas
- Remote project management
- Skid/vessel/steel structures
- DWG+3D
- 10+ yearsExperience in modular equipment and piping
- 100+ projectsDosing, Pumping Units and Steel Structures
- 25My best score on parallel bars
- need 1 dayTo analyse project data
I have extensive experience designing modular units for the oil and gas industry. I gained my knowledge at top-tier enterprises with full-cycle production facilities. I have learned to develop P&ID and read electrical schematics, prepare technical datasheets and analyze contractor requirements from my colleagues.
I have already had more than 15 contract project. This type is my favourite because I can use all my expirience without restriction.
I've participated in projects: Portovaya Compressor Station, Sakhalin Energy, Yuzhno-Kirinskoye gas field, Ust-Luga LNG Terminal.
I lived in Argentina, went paragliding, rope jumping. I love cycling (have 3 bicycles). I have got 5.000+ km and 10 marathons in this year. I dream of starting my own company.
I have already had more than 15 contract project. This type is my favourite because I can use all my expirience without restriction.
I've participated in projects: Portovaya Compressor Station, Sakhalin Energy, Yuzhno-Kirinskoye gas field, Ust-Luga LNG Terminal.
I lived in Argentina, went paragliding, rope jumping. I love cycling (have 3 bicycles). I have got 5.000+ km and 10 marathons in this year. I dream of starting my own company.
You can download my CV by clicking on the button
modular skids and vessels
All presented projects have been implemented.
Pictures are clickable
Pictures are clickable
The reagent unit is designed for methanol injection into wells of the Vachimskoye field cluster of NGDU "Bystrinskneft" (PJSC "Surgutneftegas").
Polymer Dosing for Water Treatment
The skid is designed for filtering formation water from large impurities (primarily sand)
Skid provides firefighting solution supply during fires at oil depots of PJSC 'GAZPROM'
Rectangular tank capacity 4 m3. Made by SS sheet and square pipes. Design to storage methanol in atm. pressure.
Also you can find models of my projects on
Methanol Dosing Station
Full outsource project:
- P&ID
- Electrical schematic
- PLC programming
- HVAC
- Data Sheet prep
- Vendor communication
- Warehouse consult
This project was entirely implemented by my team, excluding the tender proposal stage. It included coordination with both the design institute and operations. The most challenging part was uploading the 'volumes' to the 'SNG' system.
Back
Full outsource project:
- P&ID
- Drawings and Models
Just a simple skid. There is nothing to add
Back
Full outsource project:
- Drarwings and models
- Design includes Hot Dip Galvanizing
- Warehouse consult about transportation
A highly interesting project. The source materials included drawings from the company's European division (Poland). All structural profiles complied with EN standards. My role involved adapting them to GOST requirements. The structure was designed for wood processing waste storage.
Back
Grain Hopper
Full outsource project:
- Construction consult
- Drawings and Models
The product is interesting from a mass production standpoint: easy to manufacture, transport, and install/uninstall.
Назад
Catwalk and Ladder
Drawings and models were made by me
Nothing remarkable. Just so you know I can make 'ladders'.
Back
Rectangular Tank
Drawings and models were made by me
Maybe it's too much to reinforcement it by square pipes. It's my insurance. And if you know method to analyze rectangular tank for reinforcement you are welcome, leave some information about it in comment.
Back
Polymer Preparation Unit
Full outsource project:
- P&ID
- Electrical schematic
- PLC programming
- HVAC
- Data Sheet prep
- Vendor communication
- Warehouse consult
"COMER" fittings and valves fit perfectly. The project's complexity lay in optimizing the operating regime.
Back
Balanced Pressure Proportioning Skid
Desing assys:
- Piping
- Shelter
- Second structure
A challenging station indeed, especially considering the membrane tank procurement complexities - which of course 'missed' the embedded parts.
Back
Renders for LLC "AREOPAG"
Full outsource project:
- Renders from KeyShot and Fusion360
Creative work. No fewer than 40 products have passed through my hands – pieces you can now see on the company's official website.
Back
Steel structures and renders
More beautiful pictures
Huge structure weighning 35t for Kronospan (Bashkrtostan)
Grain Hopper for filling at the railway station
Full catalog for lovely company. You can check this out in the company site.
Ladders - they everywhere
And I also have a side project developing CAD applications
My partners and I develop Python/Django applications for implementation in industrial facilities.
You have never seen it before
© All right reserved
SE Bezginov Vladimir Olegovich
SE Bezginov Vladimir Olegovich
